Connecting a USB Serial Cable to the Border Router

View source on GitHub

By Duane Ellis

Contributor from Texas Instruments

Use a USB serial cable to connect to your Border Router serial port for debugging purposes.

BeagleBone Black

The BeagleBone Black (BBB) uses the following serial port settings:

• Baudrate: 115200
• Data Bits: 8
• Parity: None
• Stop Bits: 1

Recommended cables:

• Adafruit USB to TTL Serial Cable
• FTDI USB to TTL Serial 3.3V Cable

How to connect

For detailed information on connecting serial cables to the BBB, see the Beagleboard Wiki. For both cables, the black wire should be connected to Pin 1 (GND), which is closest to the Ethernet port.

Raspberry Pi

The Raspberry Pi (RPi) uses the following serial port settings:

• Baudrate: 115200
• Data Bits: 8
• Parity: None
• Stop Bits: 1

Recommended cable: Adafruit USB to TTL Serial Cable

To learn how to connect and enable the serial console on your RPi, see Adafruit's Using a Console Cable guide.